Skip to content
Get matched

Cost by state › Texas

2026 Q3 · rank 47 of 51

Roof replacement cost in Texas

An architectural shingle roof in Texas costs $439 per square installed on the 2026 Q3 Roof Cost Index, -12.2% against the US typical of $500. Roofers in Texas earn a mean $22.69/hour (BLS, May 2025), a labor index of 0.812.

How much does a new roof cost in Texas?

$11,289 to $21,716 for an architectural shingle roof on a 2,000 sq ft single-story home (6/12 pitch, one layer torn off, permit and dumpster included), typical $16,463. That is $3.44 to $5.34 per square foot of roof, installed.

Low
$344
per square
Typical
$439
per square, architectural shingles
High
$534
per square

All materials in Texas

MaterialLowTypicalHighUS typicalvs US
Architectural shingles $344 $439 $534 $500 -12.2%
3-tab shingles $242 $308 $374 $355 -13.3%
Standing seam metal $806 $1,128 $1,449 $1,250 -9.8%
Metal panel $425 $787 $1,149 $900 -12.5%
Tile $606 $1,593 $2,580 $1,800 -11.5%
Slate $925 $1,831 $2,737 $2,000 -8.5%
Flat membrane $212 $414 $615 $475 -12.9%
Installed cost per square (100 sq ft) in Texas, Roof Cost Index 2026 Q3. Material at national prices; labor scaled by the local BLS roofer wage. Tear-off, permit and extras not included.

A typical 2,000 sq ft footprint at a medium pitch is about 24.6 squares, so multiply the per-square figure by roughly 25 for a whole-roof number before tear-off, permit and extras. Use the calculator below for your own footprint.

Metro areas in Texas

Metro (BLS MSA)Typical / squarevs stateMetro rank of 263
Waco, TX$464+5.8%167
Austin-Round Rock-San Marcos, TX$455+3.7%185
Dallas-Fort Worth-Arlington, TX$452+3.1%192
Houston-Pasadena-The Woodlands, TX$433-1.3%231
Tyler, TX$428-2.4%242
San Antonio-New Braunfels, TX$427-2.7%245
Longview, TX$416-5.1%257
Corpus Christi, TX$407-7.2%259
Lubbock, TX$405-7.6%260
El Paso, TX$389-11.3%263

Only metros with a BLS roofer wage row appear. Areas outside these metros use the state figure.

How Texas compares

Texas ranks 47 of 51 states. Nearby on the Index: Nebraska ($443), Alabama ($443), South Dakota ($438), Tennessee ($436). The spread across all states runs from $609 to $428 per square, and the whole gap is labor: material is priced nationally in this edition.

This page is generated from the 2026 Q3 Index. A written guide for Texas is added when the state is activated with a roofer partner and a county footprint source. Methodology.

Texas roof cost questions

How much does a new roof cost in Texas?

On the 2026 Q3 Roof Cost Index, an architectural shingle roof on a 2,000 sq ft single-story home (6/12 pitch, one layer torn off, permit and dumpster included) costs $11,289 to $21,716 in Texas, typical $16,463. That is about 24.6 squares of roof.

How much is a new roof per square foot in Texas?

Architectural shingles run $3.44 to $5.34 per square foot of roof surface installed in Texas (typical $4.39), or $344 to $534 per square of 100 sq ft. Tear-off, permit and dumpster are extra.

How much does a metal roof cost in Texas?

Standing seam metal on the same 2,000 sq ft home costs $22,662 to $44,229 in Texas, typical $33,405, because standing seam material alone runs $400 to $800 per square against $100 to $250 for architectural shingles.

Why is roofing cheaper in Texas than the US average?

Labor. Roofers in Texas earn a mean $22.69 an hour (BLS, May 2025) against $27.95 nationally, a labor index of 0.812. Material is priced nationally in this edition, so the whole -12.2% gap is labor.

Which Texas metro has the highest roofing cost?

Waco, TX is the most expensive metro touching Texas at $464 per square; El Paso, TX is the least at $389. Areas outside a metro use the state figure.

Estimate a roof in Texas

Low / typical / high ranges from cited national cost tables, adjusted by local roofer wages (BLS). No email required.

Extras
Enter your roof details and press Calculate to see a low / typical / high estimate, the per-square cost, and where your area sits on the Roof Cost Index.