Skip to content
Get matched

Cost by state › Connecticut

2026 Q3 · rank 8 of 51

Roof replacement cost in Connecticut

An architectural shingle roof in Connecticut costs $558 per square installed on the 2026 Q3 Roof Cost Index, +11.6% against the US typical of $500. Roofers in Connecticut earn a mean $32.93/hour (BLS, May 2025), a labor index of 1.178.

How much does a new roof cost in Connecticut?

$13,993 to $24,870 for an architectural shingle roof on a 2,000 sq ft single-story home (6/12 pitch, one layer torn off, permit and dumpster included), typical $19,392. That is $4.53 to $6.62 per square foot of roof, installed.

Low
$453
per square
Typical
$558
per square, architectural shingles
High
$662
per square

All materials in Connecticut

MaterialLowTypicalHighUS typicalvs US
Architectural shingles $453 $558 $662 $500 +11.6%
3-tab shingles $316 $400 $483 $355 +12.5%
Standing seam metal $989 $1,366 $1,743 $1,250 +9.3%
Metal panel $571 $1,007 $1,443 $900 +11.9%
Tile $789 $1,996 $3,203 $1,800 +10.9%
Slate $1,071 $2,160 $3,249 $2,000 +8.0%
Flat membrane $286 $533 $780 $475 +12.2%
Installed cost per square (100 sq ft) in Connecticut, Roof Cost Index 2026 Q3. Material at national prices; labor scaled by the local BLS roofer wage. Tear-off, permit and extras not included.

A typical 2,000 sq ft footprint at a medium pitch is about 24.6 squares, so multiply the per-square figure by roughly 25 for a whole-roof number before tear-off, permit and extras. Use the calculator below for your own footprint.

Metro areas in Connecticut

Metro (BLS MSA)Typical / squarevs stateMetro rank of 263
Bridgeport-Stamford-Danbury, CT$613+9.8%4
Hartford-West Hartford-East Hartford, CT$557-0.2%23
New Haven, CT$547-1.9%29

Only metros with a BLS roofer wage row appear. Areas outside these metros use the state figure.

How Connecticut compares

Connecticut ranks 8 of 51 states. Nearby on the Index: Washington ($560), District of Columbia ($559), Alaska ($558), California ($552). The spread across all states runs from $609 to $428 per square, and the whole gap is labor: material is priced nationally in this edition.

This page is generated from the 2026 Q3 Index. A written guide for Connecticut is added when the state is activated with a roofer partner and a county footprint source. Methodology.

Connecticut roof cost questions

How much does a new roof cost in Connecticut?

On the 2026 Q3 Roof Cost Index, an architectural shingle roof on a 2,000 sq ft single-story home (6/12 pitch, one layer torn off, permit and dumpster included) costs $13,993 to $24,870 in Connecticut, typical $19,392. That is about 24.6 squares of roof.

How much is a new roof per square foot in Connecticut?

Architectural shingles run $4.53 to $6.62 per square foot of roof surface installed in Connecticut (typical $5.58), or $453 to $662 per square of 100 sq ft. Tear-off, permit and dumpster are extra.

How much does a metal roof cost in Connecticut?

Standing seam metal on the same 2,000 sq ft home costs $27,168 to $51,439 in Connecticut, typical $39,263, because standing seam material alone runs $400 to $800 per square against $100 to $250 for architectural shingles.

Why is roofing more expensive in Connecticut than the US average?

Labor. Roofers in Connecticut earn a mean $32.93 an hour (BLS, May 2025) against $27.95 nationally, a labor index of 1.178. Material is priced nationally in this edition, so the whole +11.6% gap is labor.

Which Connecticut metro has the highest roofing cost?

Bridgeport-Stamford-Danbury, CT is the most expensive metro touching Connecticut at $613 per square; New Haven, CT is the least at $547. Areas outside a metro use the state figure.

Estimate a roof in Connecticut

Low / typical / high ranges from cited national cost tables, adjusted by local roofer wages (BLS). No email required.

Extras
Enter your roof details and press Calculate to see a low / typical / high estimate, the per-square cost, and where your area sits on the Roof Cost Index.